This week in science we talked about solstices, equinoxes, and orbits.
A solstice is when the direct rays of the sun are farthest from the equator. The Earth's axis is most inclined towards or away from the sun during a solstice. There are two solstices, the summer and winter. The summer solstice is June 21. The direct rays of the sun hit the Tropic of Cancer. It is the longest day of the year. The winter solstice is December 21. The direct rays hit the Tropic of Capricorn. The winter solstice is the shortest day of the year.
An equinox is when the direct rays hit the equator. The tilt of the Earth is neither towards or away from the sun. The equinoxes happen in spring and summer. The days have the same amount of sunlight and darkness. March 21 is the spring equinox and September 21 is the fall equinox.
We did a simulation to see how an orbit works. Since we figured out that the object another object orbits exerts a downward force, we thought then the object would just run into the object it orbits. Using the simulation, we figured out that the initial velocity is another force on the object. When both forces are exerted, the object travels in between the directions of the forces. That is how Earth orbits the sun and how the moon orbits the Earth. In order to have a successful orbit, there are a couple requirements. The initial velocity cannot be to little or it will crash and it cannot be to great because then it will escape the orbit. Also if the object is closer to the object it is orbiting, it needs a greater initial velocity and the opposite.
We learned these ideas by research and simulations. We also did experiments.
These ideas are important to know because we are in a orbit right now. Also equinoxes and solstices happen every year so it is good to know what they are.
Monday, January 25, 2010
Tuesday, January 19, 2010
This week in class we learned about seasons. We learned why there are season and how we get them.
The Earth experiences 4 seasons, summer, fall, winter, and spring. The seasons are caused by the tilt of the Earth. Because the Earth's tilt stays the same, when it revolves around the Earth it is in a different position. Different hemisphere's face the sun at different times. When the Northern Hemisphere is tilted towards the sun, it is summer. In the southern hemisphere, it is winter. Since the northern hemisphere is tilt towards the sun, light hits the Earth more directly. When light is more direct, it is sunnier and hotter.
We learned the idea through experiments and simulations. We first had to take notes on the simulation. Then we took all our notes and put them together, trying to figure out what causes seasons. We did some experiments to prove and disprove ideas and came up with a final reason.
The seasons effect us everyday. It is important to know how they are caused because we have them every day.
The Earth experiences 4 seasons, summer, fall, winter, and spring. The seasons are caused by the tilt of the Earth. Because the Earth's tilt stays the same, when it revolves around the Earth it is in a different position. Different hemisphere's face the sun at different times. When the Northern Hemisphere is tilted towards the sun, it is summer. In the southern hemisphere, it is winter. Since the northern hemisphere is tilt towards the sun, light hits the Earth more directly. When light is more direct, it is sunnier and hotter.
We learned the idea through experiments and simulations. We first had to take notes on the simulation. Then we took all our notes and put them together, trying to figure out what causes seasons. We did some experiments to prove and disprove ideas and came up with a final reason.
The seasons effect us everyday. It is important to know how they are caused because we have them every day.
Sunday, January 10, 2010
week of 1/3/09
This week in science class we started our new unit, astronomy. We started learning about the moon and its orbit and phases.
The moon has 8 phases. The moon goes through all 8 phases in about 29.5 days. That is about 2 moon phases a week. Each cycle starts with a new moon. A new moon is on the same side as the sun, so to an observer on Earth, the moon is not illuminated at all. Then after new moon is a waxing crescent. Then comes the first quarter. It is exactly 1/2 illuminated. Then after that is a waxing gibbous. After that is the full moon. The full moon is opposite the sun so to an observer on Earth, the moon is fully illuminated. After a full moon is a waning gibbous. Then there is the third quarter. Like the first quarter, 1/2 half of the moon is illuminated, but this time it is the other half of the moon. Last before the new moon is a waning crescent. Then the cycle starts over again. The moon orbits the Earth counterclockwise to an observer looking down at the north pole. The moon;s ratio of rotations to revolutions is 1 to 1. That means we see the same side of the moon all the time.
We learned all this information by using a lunar simulation. It shows the Earth, moon, and sun. There are some side panels that show the moon phases and what it would look like to a person on Earth. We had a lab to do and used the simulation to help.
This information is useful in the real world because we see the moon everyday. It is important to know how it works. Also the moon the moon interacts with some things on Earth like the tide so it is important to know what it does.
The moon has 8 phases. The moon goes through all 8 phases in about 29.5 days. That is about 2 moon phases a week. Each cycle starts with a new moon. A new moon is on the same side as the sun, so to an observer on Earth, the moon is not illuminated at all. Then after new moon is a waxing crescent. Then comes the first quarter. It is exactly 1/2 illuminated. Then after that is a waxing gibbous. After that is the full moon. The full moon is opposite the sun so to an observer on Earth, the moon is fully illuminated. After a full moon is a waning gibbous. Then there is the third quarter. Like the first quarter, 1/2 half of the moon is illuminated, but this time it is the other half of the moon. Last before the new moon is a waning crescent. Then the cycle starts over again. The moon orbits the Earth counterclockwise to an observer looking down at the north pole. The moon;s ratio of rotations to revolutions is 1 to 1. That means we see the same side of the moon all the time.
We learned all this information by using a lunar simulation. It shows the Earth, moon, and sun. There are some side panels that show the moon phases and what it would look like to a person on Earth. We had a lab to do and used the simulation to help.
This information is useful in the real world because we see the moon everyday. It is important to know how it works. Also the moon the moon interacts with some things on Earth like the tide so it is important to know what it does.
Saturday, December 19, 2009
Week of 12/14/09
This week in class we started to talk about Newton's Laws of Motion. Newton's first law is the delta V arrow is the same direction as the unbalanced force. Newton's second law is that if you divide the unbalanced force by an objects mass, you will get it acceleration. This means the mass of an object effects the acceleration. A larger mass accelerates slower and a smaller mass accelerates faster. Newton's third law of motion is, when object A exerts a force on object B, it is always the same in magnitude and opposite in direction when object B exerts a force on A. It says whenever one object exerts a force on another, both objects would exert a force. If you hit a golf ball the ball and the club exert an equal force on each other, but the ball goes farther because the club has a greater mass. The prof the ball exerts a force on the club is the dent and wearing down of the club. Another example would be if me and my dad were on roller blades. If my dad pushed me, i would go far and he wouldn't. If i pushed him i would still go farther but going in the opposite direction.
We learned these laws by preforming tests and experiments. We figured out the first law when we had our debate last week. We learned the second law by pushing a cart down the hall adding more and more mass to it. We learned the third law by trying to exert different amounts of force onto each other and it didn't work.
These ideas will help in the future because motion is everywhere. If i played golf, I might need to know why my club wears down so much or why if I try to push my dad I go farther. It helps knowing theses laws of motion.
We learned these laws by preforming tests and experiments. We figured out the first law when we had our debate last week. We learned the second law by pushing a cart down the hall adding more and more mass to it. We learned the third law by trying to exert different amounts of force onto each other and it didn't work.
These ideas will help in the future because motion is everywhere. If i played golf, I might need to know why my club wears down so much or why if I try to push my dad I go farther. It helps knowing theses laws of motion.
Saturday, December 12, 2009
Week of 12/7/09
This week we learned some very important ideas. We talked more about motion and force diagrams. A very important idea was that the unbalanced force of an object is the same direction as the delta V arrow or the acceleration.
Lets say we had a cart and we pushed it on a smooth surface going positive. If we were to draw a force diagram, there would be an unbalanced force in the positive direction. If we were to draw a motion diagram, the dots would get farther and farther apart. The delta V arrow would be going in the positive direction. The delta V arrow and the unbalanced force are going the same direction. If the cart was slowing down in the negative direction, the delta V and unbalanced force would be going positive. The greater force, which is going positive, would be causing the cart to slow down. The unbalanced force is going positive. The delta V is going positive too.
We learned this idea by having a debate. Someone asked the question, is the delta V and unbalanced force pointing the same way. The class split up into who thought they went the same way and who didn't. We explained why we thought our idea was right then figured out which one was right.
This idea will help in the real world because when an object slows down, we know why. If we are in a car that slows down, we know there is a force that is pushing the opposite way and slowing the car down.
Lets say we had a cart and we pushed it on a smooth surface going positive. If we were to draw a force diagram, there would be an unbalanced force in the positive direction. If we were to draw a motion diagram, the dots would get farther and farther apart. The delta V arrow would be going in the positive direction. The delta V arrow and the unbalanced force are going the same direction. If the cart was slowing down in the negative direction, the delta V and unbalanced force would be going positive. The greater force, which is going positive, would be causing the cart to slow down. The unbalanced force is going positive. The delta V is going positive too.
We learned this idea by having a debate. Someone asked the question, is the delta V and unbalanced force pointing the same way. The class split up into who thought they went the same way and who didn't. We explained why we thought our idea was right then figured out which one was right.
This idea will help in the real world because when an object slows down, we know why. If we are in a car that slows down, we know there is a force that is pushing the opposite way and slowing the car down.
Saturday, December 5, 2009
Week of 11-30-09
This week in class we began learning about forces. We learned how to make a force diagram.
Making a force diagram takes 3 steps. First you have to find all the objects that are interacting with the situation. If the situation is a picture frame hanging on a hook, the interacting objects would be the hook and the Earth. Then you can make the diagram. To start you make a dot and label it picture frame. Then you draw the forces. The force pushing up would be the hook. The force pushing down would be the Earth. You would label them, F hook on frame, or F Earth on frame. Make sure both lines are the same length! If they aren't the same length then the picture frame would move up or down. The last step is to make a number sentence. You make up a reasonable number to represent each force and make them equal 0. A good number sentence for the frame would be, (5N)+(-5N)=)0N. The 5N is the hooks force and the -5N is the Earths force. Since the hook stays still and isn't moving up or down the numbers have to equal 0N.
We learned this idea by talking about forces and ending up with a force diagram. We also learned it by pushing Mr. Segan's car. By preforming that experiment we learned about forces and motion.
A force diagram and forces in general will help out a lot in the real world. Forces are used every single second of every day. I am using a force to type this blog now! Since forces are always used it is really helpful to understand them and be able to explain and draw them.
Making a force diagram takes 3 steps. First you have to find all the objects that are interacting with the situation. If the situation is a picture frame hanging on a hook, the interacting objects would be the hook and the Earth. Then you can make the diagram. To start you make a dot and label it picture frame. Then you draw the forces. The force pushing up would be the hook. The force pushing down would be the Earth. You would label them, F hook on frame, or F Earth on frame. Make sure both lines are the same length! If they aren't the same length then the picture frame would move up or down. The last step is to make a number sentence. You make up a reasonable number to represent each force and make them equal 0. A good number sentence for the frame would be, (5N)+(-5N)=)0N. The 5N is the hooks force and the -5N is the Earths force. Since the hook stays still and isn't moving up or down the numbers have to equal 0N.
We learned this idea by talking about forces and ending up with a force diagram. We also learned it by pushing Mr. Segan's car. By preforming that experiment we learned about forces and motion.
A force diagram and forces in general will help out a lot in the real world. Forces are used every single second of every day. I am using a force to type this blog now! Since forces are always used it is really helpful to understand them and be able to explain and draw them.
Saturday, November 21, 2009
week of 11-21-09
This week in class we learned more about motion. A new idea we talked about was a drawing and reading motion diagrams.
A motion diagram is drawn as a dot diagram. Then you add the origin and directions (positive and negative) as you normally would. The difference between a dot diagram and a motion diagram is the addition of velocity arrows and labels of velocity arrows. These diagrams are better than a dot diagram because they tell you more. Dot diagrams only showed the pattern of the motion. There was no exact information in them. Motion diagrams show direction and the information in more depth.
We learned how to draw a motion diagram by taking a dot diagram and improving it. Then when we were asked to solve questions and problems we needed to draw a motion diagram instead of a dot diagram.
A motion diagram will help me later in life because if I know something, it can always be improved. I never knew that adding a couple more details in a diagram would change it all together. Knowing that you can always improve can help with writing because even if you think your work is good, it can always be improved.
A motion diagram is drawn as a dot diagram. Then you add the origin and directions (positive and negative) as you normally would. The difference between a dot diagram and a motion diagram is the addition of velocity arrows and labels of velocity arrows. These diagrams are better than a dot diagram because they tell you more. Dot diagrams only showed the pattern of the motion. There was no exact information in them. Motion diagrams show direction and the information in more depth.
We learned how to draw a motion diagram by taking a dot diagram and improving it. Then when we were asked to solve questions and problems we needed to draw a motion diagram instead of a dot diagram.
A motion diagram will help me later in life because if I know something, it can always be improved. I never knew that adding a couple more details in a diagram would change it all together. Knowing that you can always improve can help with writing because even if you think your work is good, it can always be improved.
Subscribe to:
Posts (Atom)